HVS/HVSR In-Line Transition/Reducer Kit

HVSR “reducer” kits are used as a transition splice when the PILC/VCLC conductor size is much smaller than that of the poly cable. It can be used as an in-line splice for paper-insulated, lead-covered (PILC) cable or varnished cambric-insulated, lead-covered (VCLC) cable. It can also be used as a transition splice — PILC/VCLC to poly (copper tape, lead sheath, wire shield, UniShield, or jacketed/unjacketed concentric neutral) cable.

Categories: Cable Management System, Electrical, Heat Shrink Joints and Splices, Termination Kits & Cable Joint Kits

TE Connectivity

Product Type Features

Joints & Splice Technology Heat Shrink
Joints & Splice Product Type Medium Voltage Inline Joint
Insulation Paper (PILC)
Cable Shield Style Tape
Mechanical Connectors Included No
Product Family HVS, HVSR
Component Design Heat Shrink
Coating Style Inline

Configuration Features

Number of Cores 1

Electrical Characteristics

Joints & Splice Voltage Class (kV) ≤ 15, ≤ 25, ≤ 35

Dimensions

Cross-Section Range (mm²) 50 – 240
Cross-Section Range (AWG/kcmil) 1 – 250, 1 – 500, 1/0 – 250, 250 – 350, 300 – 750, 350 – 500, 4 – 350, 4 – 4/0, 4/0 – 1000, 4/0 – 750, 500 – 1000, 500 – 750, 750 – 1000
Joints & Splice Insulation Diameter (mm) 24 – 26.67, 15.24 – 33.02, 20.32 – 27.94, 20.32 – 38.1, 20.32 – 45.74, 21.6 – 31.75, 21.6 – 33.02, 26.67 – 35.56, 26.67 – 40.64, 29.21 – 38.1, 29.21 – 45.72, 30.48 – 43.18, 31.75 – 48.26, 38.1 – 48.26, 40.64 – 50.8
Joints & Splice Insulation Diameter (in) .6 – 1.05, .6 – 1.3, .8 – 1.1, .8 – 1.5, .8 – 1.8, .85 – 1.25, .85 – 1.3, 1.05 – 1.4, 1.05 – 1.6, 1.15 – 1.5, 1.15 – 1.8, 1.2 – 1.7, 1.25 – 1.9, 1.5 – 1.9, 1.6 – 2
Cable Cross-Section (Max) (Main) (mm²) 240
Cable Cross-Section (Min) (Main) (mm²)50
Joints & Splice Conductor Diameter (mm) 84 – 13.46, 5.84 – 17.27, 8.38 – 14.73, 8.38 – 20.57, 9.4 – 14.73, 13.46 – 25.4, 13.46 – 29.21, 14.73 – 15.5, 14.73 – 25.4, 17.27 – 20.6, 20.57 – 29.21, 20.6 – 25.4, 25.4 – 29.21
Joints & Splice Conductor Diameter (in) .23 – .53, .23 – .68, .33 – .58, .33 – .81, .37 – .58, .53 – 1, .53 – 1.15, .58 – .61, .58 – 1, .68 – .81, .81 – 1, .81 – 1.15, 1 – 1.15
Insulation Diameter (Plastic) (in) .65 – 1.05, .9 – 1.25, .9 – 1.3, 1.05 – 1.4, 1.1 – 1.6, 1.15 – 1.5, 1.25 – 1.8, 1.3 – 1.75, 1.55 – 1.9, 1.6 – 1.9, 1.65 – 2
Insulation Diameter (PILC) (in) .6 – .9, .8 – 1.1, .8 – 1.2, .85 – 1.1, .85 – 1.2, 1.05 – 1.3, 1.05 – 1.4, 1.15 – 1.45, 1.15 – 1.5, 1.2 – 1.7, 1.25 – 1.5, 1.5 – 1.7, 1.6 – 2